Single Row Ball Bearings
Single Row Ball Bearings 6000 Series Made to meet ABEC-1-ABEC-3 dimensional tolerance standards, these sound tested, electric-motor-quality bearings handle radial loads and a third the amount of side load, or axial load. Temperature range is –22° to 240° F. Shielded bearings are better for clean or enclosed environments. Sealed bearings are a better choice for dirty or exposed environments.Single Row Angular Contact Ball Bearings The raceways in these bearings are positioned off-center to handle angular (combined radial and thrust) loads. Single-row bearings handle thrust loads on one side.
The most popular type are the single row bearings; these can carry appreciable thrust load in one direction combined with a radial load or without a radial load. Paired mounting of two or more single row angular contact ball bearings is commonly used to accommodate heavier or two-directional thrust loads and/or radial loads in various.
- SKF 117KSFF Single Row Ball Bearings
- 1.2500 in
- 4410 lbf
- SKF 117KS Single Row Ball Bearings
- 0.6250 in
- Without Snap Ring
- SKF 118KS Single Row Ball Bearings
- 1.1875 in
- 1-7/8 in
- SKF 214S Single Row Ball Bearings
- 4.4375 in
- Powder Coat
- SKF 117KSF Single Row Ball Bearings
- 4.2500 in
- 3.9370 in
- SKF 117KSG Single Row Ball Bearings
- 50 mm
- 3600 kgf
- SKF 214SFFC Single Row Ball Bearings
- 2.1250 in
- Cast Iron
- SKF 213S Single Row Ball Bearings
- 2-3/4 in
- 197 kN